Kalystrus

Product Codes

Table

TKL160	TKL160R_M	TKL300W_M
TKL160G	TKL160W_M	TKL300_M
TKL160GR_M	TKL160_M	TKL300_MR
TKL160GW_M	TKL160_MR	TKL300_MW
TKL160G_M	TKL160_MW	TKL350
TKL160G_MR	TKL300	TKL350_MR
TKL160G_MW	TKL300R_M

Tray

TKL65V

TKL65V_M

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

We must not forget that travertine marble has an "alveolar" structure with alternating compact and highly porous areas. To offset the inconvenience of natural hollows on the surface (i.e. build up of dust...), B&B Italia has implemented a precise filling process to seal all hollows with travertine dust. Therefore the most evident cavities on table edges and tops are filled to ensure a smoother and more homogeneous surface. Variations can hence be noticed in the degree of porosity, shade of colour, light refraction and unevenness of filled surface areas, compared to the original travertino. The picture below provide an example of the final result.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Top
veneered wood fibre panel, marble (glossy polyester finish or matt polyester finish)

Lower shelf
painted wood fibre panel

Legs
curved multi-layered wood with wood fibre sections, marble (glossy polyester finish, matt polyester finish natural finish)

Top support frame and base-frame
painted steel

Swivel tray (TKL65V-TKL65V_M)
veneered multi-layered wood, marble (glossy polyester finish, matt polyester finish natural finish)

Swivel tray rotation mechanism (TKL65V-TKL65V_M)
aluminium with steel balls

Ferrules
plastic material

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Marble (polyester)

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
Warning! Marbles with polyester can turn yellow if exposed to constant sunlight and/or high temperatures and humidity.

Marble (natural)

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
Warming! Natural marbles are not finished in any way, therefore it is possible to notice filled cracks on the product.

Steel

We advise using normal commercial products for cleaning delicate surfaces and/or warm water and neutral soap.
Never use abrasives or products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.