Product identity

Product Codes

Bed

ACL2	ACL5	ACLQ
ACL4	ACLK

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

The technological difference between wood and other materials is that woods are rich in water. Wood is therefore a hygroscopic material that is subject to water exchange with the external environment, which can cause dimensional variations and shrinkage cracks on a macroscopic level, inside a certain interval of possible humidity levels. The phenomenon of shrinkage in solid wood is inevitable because direct exposure to sun and air causes the wood to dry out naturally. Shrinkage cracks are therefore to be considered a physiological phenomenon and not proof of low quality of the material or of the presence of defects.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Frame
solid wood, veneered multi-layered wood panel

Headboard internal frame
multi-layered wood panel

Headboard internal frame upholstery
shaped polyurethane

Slatted base
tubular steel and wood multi-layered slats

Ferrules
plastic material

Cover
leather

Maintenance

Cover (Alfa, Beta, Gamma, Koto leather)

For regular cleaning, we recommend a weekly dusting with a soft cotton cloth. If the cover is stained, promptly remove the cause and dry the affected area.
Finally, wipe with a sponge dampened with water and mild detergent (or water and milk).
Wipe with a gentle circular motion and work from the outside of the stain toward the inside.
The action should be more like a skin massage than mechanical rubbing.
Before applying any product over broad areas, it is advisable to test the effectiveness of the procedure by applying the product on a small, hidden area, even though the product may be specifically designed for the material.
After cleaning, apply a solution of water and milk to restore the protective qualities and softness of the leather.
Remember that leather treated with aniline is highly absorbent and may require more frequent cleaning when subjected to heavy-duty use in high-traffic areas.
Two or three times a year, we recommend applying products included in the 'Kit for leather maintenance and cleaning' by B&B Italia (code SETPN) using a soft cloth. The kit is available from our Stores and dealers.

Cover (Kasia leather)

Regularly clean with a soft, dry cotton cloth to release the dust from the pores. Avoid strenuous rubbing.
If the cover is stained, immediately pat the stain with a paper towel or dry cloth. Try to absorb the stain without vigorous rubbing.
Never apply a liquid on this leather - not even detergent specially designed for cleaning it.
For further information on Kasia leather, kindly read the attached brochure.

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Warranty

B&B Italia guarantees the cover, the feet, the materials, accessories and mechanisms making up the product for 26 months from the date of manufacture (as stated on the "Product data sheet - Guarantee") against any manufacturing defect including lacquering and frame of non-upholstery products. In any case, it has to be pointed out that the materials, even if adequately lightfast to sunlight and artificial light, may be subject to alterations over time due to prolonged exposure to light, washing and ordinary mechanical wear. The guarantee refers to original product manufacturing defects and consists of replacement or repair, free of charge, of the unusable or defective parts, ascertained and acknowledged as such by B&B Italia or its representative. The guarantee does not cover anomalies and spoilage due to:

normal wear over time;
illegitimate use;
inappropriate care with treatments not complying with the enclosed instructions.

Moreover, the guarantee does not cover defects of non-compliance that cannot be attributed to B&B Italia (e.g. incorrect assembling of the product and/or assembling not complying with the assembling instructions). This provision also applies to those products that are designed to be installed directly by the consumer, in the presence of correct and exhaustive instructions. The guarantee shall be forfeited if the products are unassembled, modified or repaired by anyone who is not authorised by B&B Italia. Any intervention made in guarantee does not interrupt the course thereof. To exercise the rights deriving from this guarantee, the relevant "Product data sheet - Guarantee" shall be forwarded to B&B Italia (to the address stated below) bearing the date of manufacture; said "Product data sheet - Guarantee" shall therefore be retained for the entire period during which the guarantee is valid. B&B Italia S.p.A. 22060 Novedrate (CO) Italy, Strada Provinciale 32 n.15 For the purpose of better preserving the product over time it is recommended:

not to jump or sit on the overhanging parts, the backrests and the armrests;
not to drag the product, lifting it instead, so as to avoid damages to the parts resting on the floor;
to protect the product against shocks and contact with pointed and sharp elements and liquids or detergents containing corrosive agents;
to follow the care instructions listed in the specific section of the material enclosed with the product.

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.