Product identity

Product Codes

Table

ART30	TAR30	TAR30M_W
ART35	TAR30M_R	TAR35

Warnings

Keep for reference: read carefully.

Always remember to be careful not to use the product improperly, considering its designated functions.

When the product is no longer used, do not abandon it, but take it to a suitable public waste collection facility.

To maintain the quality and finish of the surface, it is advisable to use protective articles (e.g. placemats or trivets) under objects that could scratched it.

The technological difference between wood and other materials is that woods are rich in water. Wood is therefore a hygroscopic material that is subject to water exchange with the external environment, which can cause dimensional variations and shrinkage cracks on a macroscopic level, inside a certain interval of possible humidity levels. The phenomenon of shrinkage in solid wood is inevitable because direct exposure to sun and air causes the wood to dry out naturally. Shrinkage cracks are therefore to be considered a physiological phenomenon and not proof of low quality of the material or of the presence of defects.

This product sheet complies with the legal obligations pursuant to the "Consumer Code" Decree n. 206 dated 6/9/2005 and the "Actuation Regulation" Decree n. 101 dated 8/2/1997.

Materials

Top
solid wood, veneered plywood panel with honeycomb-core and wood particles, marble (glossy polyester finish or matt polyester finish)

Frame
solid wood

Adjustable feet
steel and plastic material

Maintenance

Wood - Painting

For weekly maintenance, dust the surface with a dry cloth.
For dried dirt, use a well-squeezed out cloth, damp with warm water.
For greasy or oily dirt, use a damp sponge and dish washing detergent, and then wipe with a well-squeezed out cloth damp with warm water.
Warning! Apply the detergent directly on the damp sponge, and never on directly on the furniture.
Do not exert excessive pressure and always follow the grain on wood furniture.
Note that if you press or rub too hard, surfaces can become 'polished'.
Avoid using abrasives and products containing solvents, ammonia and/or alcohol.
Make sure to dry the surfaces completely after washing.

Marble (polyester)

For normal maintenance, we advise using a microfibre cloth damp with warm water.
In case of stains caused by liquids and/or greasy substances, blot/remove the stain immediately and then wipe the entire surface with a cloth damp with warm water.
Never use solvents or abrasive detergents, and always avoid contact with very hot objects (e.g. flatware, coffee pots, teapots).
To maintain the quality and finish of the surface over time, it is advisable to use protection on the surface (e.g. placemats or trivets) under objects that could scratch it.
Warning! Marbles with polyester can turn yellow if exposed to constant sunlight and/or high temperatures and humidity.

Instructions

Download PDF

Designer

Antonio Citterio

Antonio Citterio was born in Meda (Milano) in 1950, and started his design office in 1972, graduating in architecture at the Politecnico di Milano in 1975. Between 1987 and 1996 he worked in association with Terry Dwan and, together, they designed buildings in Europe and Japan.

In 2000, with Patricia Viel, he founded a practice for architecture and interior design, developing international complex long-term projects, at all scales and in synergy with a qualified network of specialist consultants. The studio has today taken the name of "Antonio Citterio Patricia Viel". Antonio Citterio currently works in the industrial design sector with numerous Italian and foreign companies. In 1987 and in 1994 he was awarded the Compasso d’Oro-ADI. From 2006 to 2016 he has been professor of Architectural Design at the Mendrisio Academy of Architecture (Switzerland). In 2008 he was honoured by the Royal Society for the Encouragement of Arts, Manufactures & Commerce of London, which gave him the title of “Royal Designer for Industry”.

Antonio Citterio is art director of Maxalto, Arclinea and Azucena.